Novaloc abutments

Maximum hardness combined with the best sliding properties.

The Novaloc abutment is a further development of our MedentiLOC abutments and provides a nearly wear-free, mirror-smooth surface, which is almost as hard as diamond. The smallest possible opening at the head prevents food remains. The angled Novaloc abutments are the first to allow divergences between implants to be properly compensated.

ADLC coating

The surface quality of the ADLC coating (amorphous diamond-like carbon) sets new standards. Maximum hardness in combination with optimum sliding reduce abrasion on the abutment and damage to the retention inserts.

Divergence compensation

In combination with the angled Novaloc abutments they can be used to compensate for divergences of up to 70° between the implants.

Retention insert

The retention inserts made of high performance plastic PEEK are manufactured very precisely and can absorb lateral pressure by the patent-protected design.

Matrix housing

The matrix housing is available in titanium and in beige-coloured PEEK. The solution where there is limited space or if a metal-free option is required.

Screw head opening

The small screw head opening of the straight Novaloc abutment reduces food remains.

Outstanding handling

Retention inserts can be inserted and removed within 5 seconds. Accessories such as the very low impression matrix or easy-to-use matrix housing extractor guarantee stress-free handling.

Matrix system | Permanent quality

ADLC coating: The surface quality of the ADLC coating (amorphous diamond-like carbon) sets new standards. Maximum hardness in combination with optimum sliding reduces abrasion on the abutment and damage to the retention inserts.

Screw head opening: The small screw head opening of the straight Novaloc abutment reduces food remains.

Placement instrument: The straight Novaloc abutments can be inserted using the respective original placement instrument of the corresponding implant system.

Divergence compensation: In combination with the angled Novaloc abutments they can be used to compensate for divergences of up to 70° between the implants.

Angulation: Angulation of the abutment is 15°

Gingival heights: The angled Novaloc abutments are available in 5 different gingival heights.

Placement instrument: All angled Novaloc abutments are inserted using the Ball-Torx placement instrument (M03-8 or M 10-8), guaranteeing reliable force transfer.

Gingival height | Maximum flexibility

The Novaloc abutments are available in 5 different gingival heights.

Retention inserts | No compromise

You have the choice between 6 retention inserts with different retention forces, which easily master divergences up to 20 degrees per implant. In combination with angled Novaloc abutments even 35° per implant.

Extra-light